Complete Dairy Processing Plant

Complete Dairy Processing Plant Equipment Catalogue

From raw milk reception to hygienic filling, packaging, utilities and environmental services

1. Catalogue Purpose and Design Basis 1

2. Milk Reception and Raw Milk Handling 2

3. Separation, Standardisation and Pasteurisation 2

4. Product Processing Modules 3

5. Filling, Packing and Finished-Goods Handling 3

6. Cleaning-in-Place and Hygiene Systems 4

7. Utility and Service Plant 4

8. Drainage, Wastewater and By-product Handling 6

9. Automation, Quality Control and Traceability 6

10. Procurement, Documentation and Project Delivery 6

10.1 Final Scope Checklist 7

1. Catalogue Purpose and Design Basis

Project design data to be confirmed before equipment selection
ParameterTypical catalogue range / requirement
Raw milk intake5,000–250,000 litres/day; road tanker, churn or both
Processing rate1,000–50,000 litres/hour per line
ProductsPasteurised milk, cream, cultured products, ESL milk, UHT milk and product variants
Operating patternSingle, double or continuous shift; seasonal peak capacity stated separately
PackagingHDPE/PET bottles, cartons, pouches, cups, bag-in-box or bulk containers
Hygienic standardFood-grade product-contact materials, drainable design and validated CIP
Product-contact materialNormally stainless steel 316L; non-contact frames normally 304
ControlsPLC/HMI, recipes, batch records, alarms, trends and production reporting

2. Milk Reception and Raw Milk Handling

EquipmentFunction and principal featuresTypical options
Tanker reception bayWeather-protected unloading point with kerbing, drainage, hose rack, earthing and traffic protectionOne or multiple bays; access platform; tanker top-sampling station
Raw milk sampling stationRepresentative sample collection for temperature, antibiotics, acidity, fat, protein, density and microbiology checksAutomatic sampler; barcode/LIMS link
Reception strainer/filterRemoves gross foreign matter before pumpingDuplex filter, automatic changeover, differential-pressure indication
Unloading pump setHygienic centrifugal or positive-displacement transfer from tankerVariable-speed drive, dry-run protection, duty/standby arrangement
Air eliminator and flowmeterRemoves entrained air and records accepted milk quantityMass or electromagnetic meter; legal-for-trade package where required
Inline reception coolerPlate heat exchanger cools incoming milk to storage temperatureChilled-water or glycol circuit; heat recovery
Raw milk silos/tanksInsulated storage with top-entry or side-entry agitator, level and temperature measurement10–300 m³; load cells; high-level protection; aseptic vent filter
Reception valve manifoldRoutes milk to selected silo and separates product from CIP returnMix-proof valves; automated line proving

3. Separation, Standardisation and Pasteurisation

EquipmentDutyKey specification points
Balance tankMaintains constant feed and provides low-level protectionHygienic design, spray device, level control and overflow protection
Regenerative plate heat exchangerPreheats, pasteurises, cools and recovers energyMulti-section frame, food-grade gaskets, differential-pressure control
Clarifier/separatorRemoves sediment and separates skim milk and creamSelf-cleaning bowl, automatic solids discharge, vibration monitoring
Automatic standardisation unitControls milk fat and cream concentration to recipeFlow, density and fat measurement with closed-loop control
HomogeniserReduces fat globule size and stabilises productOne- or two-stage; product-pressure monitoring; pulsation damping
Holding tubeProvides validated legal holding time at pasteurisation temperatureFixed geometry; calculated minimum flow condition
Flow-diversion assemblyDiverts under-processed milk away from forward flowIndependent temperature verification, fail-safe valve position and event record
Pasteurised milk buffer tankDecouples pasteuriser from filling lineClosed hygienic tank, filtered vent, gentle agitation and short residence time
Hot-water setProvides stable pasteurisation heating mediumSteam-to-water exchanger, circulation pump, expansion vessel and controls

4. Product Processing Modules

ModuleIncluded plant
Pasteurised drinking milkStandardisation, homogenisation, HTST pasteurisation, chilled buffer storage and direct feed to filler
CreamCream balance tank, standardisation, pasteuriser, optional homogeniser, ageing tank and filler feed
Fermented milk/yoghurtMix tank, powder induction, high-heat treatment, homogeniser, fermentation tanks, cooling, fruit dosing and cup/bottle filling feed
ESL milkEnhanced microbial reduction, high-temperature processing, hygienic surge tanks and ultra-clean filling interface
UHT milkDirect or indirect UHT system, deaeration where required, aseptic homogeniser, aseptic tanks and sterile transfer
Flavoured milkSugar/syrup preparation, powder induction, filtration, blending, stabiliser hydration and thermal processing
Recombined milkWater treatment, powder handling, high-shear mixing, fat melting/dosing, hydration tanks and standardisation

5. Filling, Packing and Finished-Goods Handling

EquipmentApplication and options
Container infeedDepalletiser, unscrambler, bottle blower, carton magazine or pouch-film unwind
Container treatmentAir rinse, water rinse, chemical sterilisation or UV treatment according to hygiene class
Filler-capper/sealerVolumetric, mass-flow, level or time-pressure filling; clean, ultra-clean or aseptic execution
Closure handlingCap elevator/sorter, cap sterilisation, torque monitoring, foil sealing or carton closure
Product recovery interfaceHygienic filler bowl/headers, return routing, product-water interface control and drain collection
InspectionFill-level, cap presence, seal integrity, label, date code, barcode and foreign-body checks
Labelling and codingPressure-sensitive, sleeve or wraparound label; batch/date coding and vision verification
Secondary packagingTray packer, wraparound case packer, shrink bundler, carton former and sealer
PalletisingRobotic or conventional palletiser, pallet dispenser, layer-pad handling and stretch wrapper
ConveyorsLow-pressure accumulation, product changeover, line control and hygienic drainage
Cold store interfacePallet transfer, racking interface, warehouse labelling and dispatch staging

6. Cleaning-in-Place and Hygiene Systems

SystemScope
Central CIP stationWater, caustic, acid and recovery tanks; dosing; heating; supply/return pumps; strainers and conductivity control
CIP circuitsDedicated or shared circuits for reception, tanks, pasteuriser, product lines, fillers and ancillary skids
Single-use CIPCompact make-up and return unit for high-risk, low-frequency or segregated duties
Valve manifoldsMix-proof routing with leakage chambers, seat-lift cleaning and position feedback
Tank cleaning devicesStatic spray balls or rotary jet heads sized for vessel geometry and soil load
Chemical storageBunded bulk/IBC storage, transfer pumps, locked dosing area, eyewash and ventilation provisions
Hygiene stationsBoot wash, hand wash/sanitise, controlled personnel entry and cleaning-equipment storage
CIP validation instrumentationTime, temperature, conductivity, flow and return-turbidity recording with recipe reports

7. Utility and Service Plant

ServiceTypical plant and distributionCritical design considerations
Potable/process waterBreak tank, booster pumps, filtration, softener, activated carbon, UV and optional reverse osmosisLocal water quality, hygienic storage, residual disinfectant, sampling and backflow prevention
Boiler and steamBoiler, feed tank, water treatment, chemical dosing, blowdown vessel, condensate return and steam headersFood-grade culinary steam where directly contacting product; pressure regulation and trap management
Hot waterSteam or heat-pump generation, insulated storage, circulation loops and temperature controlPasteuriser, CIP and wash-down demand diversity
Chilled water/glycolChillers, buffer tank, pumps, plate exchanger, glycol make-up and insulated distributionPeak cooling load, low-temperature protection, redundancy and heat recovery
RefrigerationAmmonia, CO₂ or HFC/HFO package, compressors, condensers, evaporators and safety detectionRefrigerant regulation, machinery-room ventilation, relief discharge and competent maintenance
Compressed airOil-free or food-grade compressor, receiver, dryer, filters and ring mainSeparate instrument and process-air quality classes; dew point and condensate management
Electrical powerTransformer, main LV switchboard, motor control centres, variable-speed drives, UPS and standby generatorLoad schedule, discrimination, harmonics, hygienic enclosure rating and emergency supplies
Process gasesNitrogen/CO₂ storage or generation, pressure regulation, sterile filtration and distributionFood-grade certification, monitoring, ventilation and asphyxiation risk controls
Ventilation/HVACAir handling units, filtration, heating/cooling, extraction and pressure zoningPositive pressure in high-care areas, condensation control and cleanable duct terminals
VacuumLiquid-ring or dry vacuum package with receiver and distributionFiller, deaerator and process duty; hygienic separation from product
Fire and life safetyDetection, alarm, hydrants, sprinklers, extinguishers, emergency lighting and evacuation systemsSite risk assessment, local code and hazardous chemical/refrigerant areas
Workshop and maintenanceMaintenance shop, spares store, lifting equipment, lubrication control and calibration benchFood-safe segregation, controlled tools and critical-spares strategy

8. Drainage, Wastewater and By-product Handling

SystemCatalogue scope
Hygienic process drainageStainless channels, trapped gullies, screened sumps, segregated storm/process networks and cleanout access
Product-loss recoveryInterface detection, first-rinse segregation, milk recovery tank and controlled rework or disposal
Wastewater pre-treatmentScreening, flow balancing, pH correction, dissolved-air flotation and sludge dewatering
Biological treatmentAerobic, anaerobic or combined treatment selected for flow, COD/BOD and discharge consent
Odour controlCovered tanks, ventilation extraction and carbon/biofilter treatment where required
Solid wasteSegregated packaging waste, rejected product containment, compactors and secure waste area
Energy recoveryHeat recovery from refrigeration, condensate and process streams; optional biogas utilisation

9. Automation, Quality Control and Traceability

AreaMinimum recommended scope
Plant automationPLC architecture, local and central HMIs, recipe control, valve/pump interlocks, route management and alarm handling
Data and reportingBatch genealogy, tank history, pasteurisation records, CIP reports, downtime, yields and utility consumption
InstrumentationCalibrated flow, level, pressure, temperature, conductivity, turbidity, density and analytical measurement
LaboratoryMilk analyser, pH meter, balances, incubators, antibiotic test equipment, microbiology facilities and sample refrigeration
In-process qualityDefined sampling points, rapid tests, filler checks, environmental monitoring and release controls
TraceabilityRaw-milk lot through process tanks, ingredients, packaging batches, finished product and dispatch
CybersecurityRole-based access, backups, network segregation, secure remote support and change control

10. Procurement, Documentation and Project Delivery

DeliverableRequired content
Process design packageProcess description, mass and energy balance, equipment list, PFDs, P&IDs and utility summary
Equipment documentationDatasheets, general arrangements, materials, certificates, weld records, manuals and spare-parts lists
Electrical and controlsLoad list, single-line diagram, I/O list, network architecture, control narrative, software backup and licences
InstallationBattery limits, foundations, pipe supports, access platforms, insulation, cabling, drains and hygienic finishes
TestingFactory acceptance test, installation checks, water trials, product trials, performance test and acceptance criteria
ValidationPasteurisation/sterilisation validation, CIP coverage and recipe validation, calibration and traceability challenge
TrainingOperator, maintenance, laboratory, hygiene and automation training with competency records
HandoverAs-built drawings, commissioning records, certificates, recommended spares and preventive-maintenance schedule

10.1 Final Scope Checklist

  • Confirm product portfolio, capacities, recipes, shelf-life targets and operating hours.
  • Define raw milk quality, tanker sizes, maximum unloading time and storage days.
  • Confirm local legal pasteurisation/UHT requirements and product-release criteria.
  • Prepare peak electrical, steam, cooling, water, air and wastewater load profiles.
  • Agree hygienic zoning, personnel/material flows and environmental conditions.
  • Fix equipment battery limits, redundancy philosophy and future expansion allowance.
  • Confirm package formats, nominal speeds, changeover times and line efficiencies.
  • Perform food-safety, process, chemical, pressure, electrical, refrigeration and fire risk assessments.
  • Agree performance guarantees for capacity, yield, energy, water, product losses and cleanability.
  • Complete site survey and multidisciplinary detailed design before purchase or construction.

Engineering note: This catalogue is a complete functional scope template, not a final equipment quotation. Capacities, hygienic class, materials, statutory requirements, utilities, redundancy and acceptance criteria must be confirmed for the intended country, site and product portfolio by qualified process, mechanical, electrical, food-safety and environmental specialists.

Download Complete Dairy Solution Brochure PDF

Contact

Company No. 17285207
[email protected]